V-Belts Drive Belt Inner Girth For Power Transmission - 2 / 1000Mm

V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life. The surface of EPDM has high strength resistance, which can improve the strength of the belt and disperse the stress generated on the surface of the belt during work, thus reducing the cracks on the surface of the belt, further increasing the service life and reducing the cost of use. Fit for many industrial applications, agricultural machinery, engineering machinery, etc. Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great. How to measure the length of the required belt: Wrap the rope around the two pulleys Make a mark Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt