16600-JA00A 16600-JA01A 16600-JA10A 16600-JK20A Fuel Injector Nozzle For Infiniti G35 2007-2008 For Nissan Altima Rogue 2008-2013 16600-9DE0B

Description: Direct replacement of your old injector and no modification needed. The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector. Specification: O-Rings Included: Yes, preinstalled Orifice Type: 12 Holes Disc Flow Rate: Same as Color: Green Material: Metal, Plastic Voltage: DC 12V Pin Number: 2 Manufacture Part Number: 16600-JA00A, 16600-JA01A ,16600-JA10A, 16600-JK20A Size: 65x34x19mm / 2.56"x1.34"x0.75"(L*W*H) Note: This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools! Please check the fitment section of this listing before you bid. Please kindly check again your engine volume! This is a non-OEM product, accessory only! Fitment: for Infiniti G35 V6-3498cc 3.5L F/I Vin VQ35HR 2007-2008 for Nissan Altima Base, Hybrid, S|4 Cyl 2.5L 2007-2013 for Nissan Rogue S, SL, SV|4 Cyl 2.5L 2008-2013 Package Included:1 x Fuel InjectorInstallation: Step 1. Make sure the engine is cool down. Disconnect the battery. Step 2. Remove the bolts and brackets from the fuel rail. Step 3. Disconnect the plug on each injector. Step 4. Lift the fuel rail and remove the injector from the fuel rail. Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes. Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery. Step 7. Double check for fuel leaks before and after starting the engine.