Left Tailgate Power Lift Support For Chevrolet Blazer 2019-2023 No.84335427

OE Number: 84335427Fitment of Power LIft Struts: for Chevrolet Blazer Base/L/LT/Premier/RS Sport for Utility 4-Door 2019-2023 for above car model trunk: Left Side With Power Opener This is a non-OEM product, accessory only! Specification of Liftgate Power Support Shock Strut: Material: Carbon Steel Install Place: Left Include: 1 Pc Tailgate Power Lift Support Features of Tailgate Power Lift Support: This Shocks for rear hatch will be aging, cracking, rusty connector etc. after long-term use. Replace rear hatch struts kit when the trunk door have noisy sound or clunky that hard to open and close. Instead of manually operate, this electric tailgate lift relying an actuator and plug to achieve remote control by key fob, built-in electric motor will driving and guide the electric strut to extend or contract. Installation of Rear Gate Power Support Shock: 1. Keep the tailgate door open on max height and remove inner trim panel. 2. Unplug the plug, use tools to loose the old spherical joint and insert new one. 3. Plug the liftgate plug and recover the inner trim panel. 4. Use diagnostic scanner to clear error code, just use scanner to clear if show negative/occasional; replace the lift struts if show permanent. 5.Confirm the L/R mark on struts before install it on your tailgate. Ways to Active Tailgate Remote Function: 1. Push the trunk close button. 2. Close the tailgate by hand slowly and push the trunk open button. 3. Use diagnostic scanner to reset control module and push trunk close button.