Zhdnbhnos Linsie Gas Powered Edger, 33CC 2 Blade Heads, Air-Cooled 2 Stroke Cordless Lawn Edger Gastrimmer With Handle & Shoulder Strap For Garden Law

SpecificationDisplacement:33ccPower:0.81kwRotation Speed:8500r/minEngine Type:Single-cylinder Air-cooled 2-stroke Gasoline EngineCarburetor Type:Diaphragm CarburetorIdling Speed:2800-3200r/minFuel Tank Volume:1000ml /33.8 OzProduct Length:1.75m/5.74ftGasoline Oil Mixing Ratio:20-25:1Starting Method1. Fill the fuel tank with well-proportioned fuel. (Mixing ratio: 1:20-25 for FB/FC grade engine oil, 1:40-50 for FD grade engine oil)2. Press the fuel bubble under the carburetor until the fuel bubble is full of fuel.3. Turn the off switch to the "I" position.4. Pull the starter rope.5. When there is a starting response, close the damper and pull the starter rope again.6. After starting, open the damper.7. Cycle to accelerate the warm-up machine work.8. For the first 10 hours of use, the oil mixture ratio should be a little thicker, then follow the normal ratio.Package Included:1 * Wacker1 * Oil Pot1 Pair* Goggles1 * Funnel1 * Carrying Strap1 * English ManualAll Accessories for InstallationSpecification:Color: Orange, SilverMaterial: PP, Aluminum Alloy, Manganese Steel, NylonAssembly Required: YesUsage: Side-mountedOperating Noise: About 110dbEngine Size: 26*22*27cm/10.24*8.66*10.63inProduct Length: 1.75m/5.74ftGross Weight: 8.8kg/19.4 lbsPackage Size: 107*27*27 cm/42.13*10.63*10.63 inNotes:Work Check:1.Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.2.Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge.3.Please check whether the throttle cable is stable in the carburetor position before work.4.Please check whether the blade is in good condition before work, and do not use a damaged blade.5.Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.6.Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.7. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.