60Cm Wall Mounted Knife Holder & Utensil Rack – 3 Chopstick Barrels + 10 Hooks, Space-Saving Kitchen Storage For Knives, Utensils, Tools, Punch-Free O

Product FeaturesMulti-Functional Storage – All in One: 3 chopstick barrels – store chopsticks, spatulas, ladles, and other long utensils. 10 hooks – hang scissors, ladles, bottle openers, pot holders, and small tools. Bottom rail – slide knives into place for organized storage.Wall-mounted design – frees up valuable counter and drawer space.Keeps knives and utensils organized, visible, and within easy reach.Two Installation Methods – Easy DIY Setup:Method 1: Punch-Free Installation (Nail-Free Glue)1 Connect the rag rod to the shelf – align holes. 2 Screw into the hole position – fix wiper bar. 3 Wipe the wall clean.4 Mark the left and right sides at the installation position.5 Apply nail-free glue to the base plate. 6 Press hard against the wall for 3-5 minutes. 7 Apply auxiliary paste (auxiliary stickers).8 Remove auxiliary stickers after 48 hours. 9 Hang the knife holder.10 Installation complete.Method 2: Drilling Installation (for heavy loads)1 Mark the left and right sides at the installation position. 2 Drill holes on the base plate. 3 Use a 6mm drill bit to punch holes. 4 Drive in expansion screws. 5 Screw in screws. 6 Installation complete.Made of high-quality metal with a sleek black finish.Rust-resistant and easy to wipe clean.Sturdy construction holds multiple knives, heavy utensils, and tools.Dedicated slots keep knives separated – prevents blades from dulling or scratching each other.Versatile Use: Kitchen – store chef's knives, steak knives, scissors, spatulas, ladles, and more. Pantry – hang bottle openers, measuring spoons, and small tools. Workshop – organize screwdrivers, pliers, and other tools. Bathroom – hold hairbrushes, scissors, and toiletries (if mounted in a dry area).Product Length: 60 cm / 23.6 inProduct Height: 5.8 cm / 2.3 in Number of Chopstick Barrels: 3 Number of Hooks: 10Installation Methods: Punch-Free (Nail-Free Glue) or Drilling (Screws) Material: Metal / Stainless Steel (with coating) Important Notices:Punch-free installation (nail-free glue): This method is suitable for smooth, non-porous surfaces like tile, glass, metal, and painted walls. Do not use on wallpaper, textured walls, or damp surfaces. The maximum load capacity is lower than drilling installation. Do not hang heavy items exceeding the glue's weight rating. Wait 48 hours before hanging items to allow the glue to fully cure.Drilling installation: This method is recommended for heavy loads, drywall, or porous surfaces. Use a 6mm drill bit and ensure you are drilling into a stud or use appropriate wall anchors for your wall type. This method provides the strongest and most secure hold.Surface preparation: Before installation, thoroughly clean and dry the wall surface. Remove any grease, dust, or debris to ensure proper adhesion (for nail-free glue) or secure drilling (for screws).Weight limit: Do not exceed the recommended weight limit. Distribute weight evenly across hooks and rails. Heavy items should be stored in the lower portion or using the drilling installation method.Removal (nail-free glue): To remove the rack installed with nail-free glue, use a hairdryer to heat the glue and gently pry the rack off the wall. Use a glue remover to clean any residue. Do not force removal, as this may damage the wall.Cleaning: Wipe the rack with a soft, damp cloth. Do not use abrasive cleaners, steel wool, or harsh chemicals that may damage the finish. Dry thoroughly after cleaning.Stainless Steel