Rear Right Tailgate Power Lift Support For KIA Sedona 2015-2021 No.81780-A9100

OE Number: 81780A9100/81780-A9100Fitment of Power LIft Struts: for 3.3L V6 - Gas for Kia Sedona EX, L, LX, SX 2019 2021 for Kia Sedona EX, L, LX, SX, SX Limited 2018 2020 for Kia Sedona EX, L, LX, SX, SXL 2016 2017 for Kia Sedona EX, L, LX, Limited, SX, SXL 2015 This is a non-OEM product, accessory only! Specification of Liftgate Power Support Shock Strut: Material: Carbon Steel Install Place: Right Include: 1 Pc Tailgate Power Lift Support Features of Tailgate Power Lift Support: This Shocks for rear hatch will be aging, cracking, rusty connector etc. after long-term use. Replace rear hatch struts kit when the trunk door have noisy sound or clunky that hard to open and close. Instead of manually operate, this electric tailgate lift relying an actuator and plug to achieve remote control by key fob, built-in electric motor will driving and guide the electric strut to extend or contract. Installation of Rear Gate Power Support Shock: 1. Keep the tailgate door open on max height and remove inner trim panel. 2. Unplug the plug, use tools to loose the old spherical joint and insert new one. 3. Plug the liftgate plug and recover the inner trim panel. 4. Use diagnostic scanner to clear error code, just use scanner to clear if show negative/occasional; replace the lift struts if show permanent. 5.Confirm the L/R mark on struts before install it on your tailgate. Ways to Active Tailgate Remote Function: 1. Push the trunk close button. 2. Close the tailgate by hand slowly and push the trunk open button. 3. Use diagnostic scanner to reset control module and push trunk close button.