Uxcell Metric Thread Tap M7 X 1 H2 100Mm Extra Long Straight Flute Tapping Tool

1pcs Metric Thread Tap:Thread Size: M7 x 1 (Right Hand)Accuracy: H2Total Length: 100mm / 4 inch (Extra Long)Square Shank Width: 4.4mm / 0.17 inchThread Length: 21mm / 0.83 inchNumber of Chip Flutes: 3 FlutesStyle: Straight Flute TapMaterial: High-Speed Steel 6542 (HSS 6542)Finish: UncoatedDescriptions:1. Straight flute tap, clear threads without burrs, right hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.2. Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add proper tapping oil for higher quality internal threads and more durable taps.3. 6542 high-speed steel metric taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated taps feature just the base substrate without any additional coatings, great for a wide range of applications.4. Machine taps are used with tapping machines, drilling machines, milling machines, CNC. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. NOT recommended for hand and electric drill tapping.Tips:1. Control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. The force must be uniform in tapping operations.2. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable.3. The tapping depth should not exceed 1.5 times the diameter of the tap (for example, the diameter M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.)