1Set Ignition Coil Connector Plug Harness For Chrysler 200 07-14 No.4606824Ac

Ignition Coil Connector Plug HarnessFitment: For Chrysler 200 2007-2014. 2.4L For Chrysler 300 2006-2010. 2.7L/3.5L For Dodge Avenger 2008-2014 For Jeep Compass 2007-2017 For Chrysler Sebring 2006-2010 For Dodge Journey 2009-2020 OE Number:4606824AC/4606824AB/4606869AA/4606869AD/4606869AB/4606869ACSpecification Position: Ignition Coil Material: Copper cable, Plastic Pin: 2 Size: 1.9x1.75cm/0.75x0.7in; Harness Length: 18.1cm/7.12in. Include: 2 x Ignition Coil Connector Plug Harness; 5 x Terminals Why need to replace the Ignition Coil Connector Plug Harness? 1. The engine struggles to start when the key is turned, or it fails to start after repeated attempts. 2. During starting, there’s a "chugging" sound from the exhaust pipe. 3. While driving, pressing the gas pedal results in weak acceleration, and even jerking or hesitation. 4. The engine shakes noticeably at idle. Replace worn spark plugs promptly (typically every 40,000–80,000 miles) to reduce the ignition coil’s workload.Installation 1. Turn off the engine and disconnect the car battery (negative terminal first). Be sure the engine cool down. 2. Find the ignition coil (usually on top of the engine or near the spark plugs). 3. Remove the Old Coil and install the New Coil. Align the new coil with the spark plug hole and push it down firmly until it clicks into place. 4. Start the engine and check for any unusual noises, vibrations, or warning lights.