10 Pcs 6201-2RS Ball Bearing 12Mm X 32Mm X 10Mm Double Sealed 180201 Deep Groove Bearings Carbon Steel Metal Silver Tone

NOTE:Please refer to the picture and select the right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.Description: Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and loads in both directions. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment, and so on. With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance. Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness. Single-row, pre-lubricated, normal accuracy. Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: 6201-2RS Sealed Type: Double Sealed Material: High-Carbon Steel Heat Treatment: Quenching Hardness: HRC50-55 Cage Material: Stamping Steel Inner Diameter (d): 12mm Outer Diameter (D): 32mm Thickness (B): 10mm Dynamic Load Rating (Cr): 6.82kN Static Load Rating (Cor): 3.05kN Accuracy Class: P0 (ABEC-1) Noise Level: Z1 Number of Pack: 10 Pcs