Starpower QX-SL-01 Hot Air Stirling Engine Model With Wooden / Metal Base Diy Generator Physics Experiment Science Educa

Specifications Brand STARPOWERModel QX SL 01 QX SL 01 MProduct Name Hot Air Stirling Engine ModelVersion Wooden Base Metal Base Optional Color As ShownProduct Size 180 90 90mmProduct Weight Wooden Base 310g Metal Base 380gPackage Size 200 110 115mmPackage Weight 0 35kgStart up steps 1 Put the model on the horizontal surface add some alcohol into the alcohol lamp2 Light the alcohol lamp turn the flywheel by hand until the flywheel can automatically rotate3 In the process of start move the alcohol lamp to let the model run to the best4 The height of the alcohol lamp wick should be no less than 15 mm and you can adjust the wick height to achieve the best operation Matters needing attention 1 When heating do not touch with your hands cylinder and heating portion 2 Avoid other liquid substances come into contact with cylinders in case of cylinder rustiness extinguish alcohol lamp after finishing the demonstration Maintenance plans if the model is not running very well 1 Check if there is enough alcohol in the alcohol lamp 2 Check if the small and big wheel jackscrews loose or not 3 Too high temperature in the air cylinder because of the continuous heating for a period of time will affect the performance of the product 4 Check the valve position the highest position of the flapper valve 2 is to cover one fourth of the valve port 5 Check if the angle is correct or not when the piston 7 lies in the innermost of the air cylinder the small jackscre