3.5 HP 2 Stroke Outboard Motor CDI Water Cooling Boat Engine Motor Heavy Duty Outboard Motor Fishing Boat Engine Water Cooling

DescriptionThe 3.5HP outboard motor is used for fishing boats and speedboats. It will make you more relaxed and efficient whether work or play! Key FeaturesHigh-quality Material: The high-quality aluminum alloy raw material has high hardness, anti-corrosion and anti-rust performance, which can effectively prolong the service life of the product. Powerful Motor: This engine is a 3.5hp engine with a speed of up to 5000 rpm. The powerful power allows you to drive quickly and save a lot of time. Start Quickly: It adopts a CDI ignition system, you can start the motor quickly and safely, making it easier to use and saving your energy. Good Cooling Effect: The heat sinkholes in the engine casing dissipate heat quickly to prevent burning after long periods of use. The semi-air-cooled system also makes it cool faster and reduces the failure rate. Excellent Endurance: Low fuel consumption, efficient two-stroke motor provide you with a long endurance to meet the needs of short/long distance travel. Inline Propeller Design: The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard exhaust and thrust. 180° Steering Function: It has a 180° steering function that allows you to reverse without shifting gears. Tilt Function: This item has a tilt or lift function, and can be used for shallow water operation for your convenience. Guaranteed Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. DetailsTightened Bracket: The tightened brackets are used to secure the thrusters and transom plates of the ship so that the thruster will not fall from your boats. Anti-Vortex Board: The is an anti-vortex board above the propeller. It keeps the water flow steady and you have a good driving experience. Funnel: The package comes with a funnel, you can add fuel to this motor conveniently. Rubber Handle: The handle of this motor is made of high-quality rubber, it increases the friction and prevents your hand from slipping. Easy-to-open Engine Cover: The easy-to-open engine cover with a push-button latch for immediate access to the engine for you to check real-time conditions and make timely adjustments. ApplicationIt is suitable for boats weighing 100-200kg, with a speed of about 8-10km/h (The speed will vary depending on the environment, the water and the weight of the boat.) SpecificationFull Throttle Operating Range:4000-5000r/MinMaximum Output: 2.5kw(3.5hp)Speed:10km/HType: 2-StrokeIgnition System: CDI SystemStarting System: Manual StartStaring Carburetion System: Choke StartPropeller Mark: 7-1/45-a(Inch)The Engine and the Propeller Ratio:2:1Recommended Fuel: Regular Unleaded GasolineFuel Type: Mixed Oil (Run-in Period: 25 Gasoline: 1 2-stroke Engine Oil; after Run-in Period: 50 Gasoline: 1 2-stroke Engine Oil)Gear Ratio: 27/13Maximum Speed: 10 Km / HBuilt-in Fuel Tank: 1.3L/0.29GalFuel Consumption per Hour: 1.5L/0.33GalTransom Height:42cm/16.54Adaptive Transom Plate Height: ≤42cm/16.53inGross Weight: 12kg/26.4lbsNet Weight: 9.8kg/21.6lbsProduct Size: 92*36*15cm/36*14.17*5.9inPackage Size: 95*42*30cm/37.4*16.5*11.81inAdaptable Stern Height: 38-44cm/14.96-17.32inchMeasurement of the Stern: The Distance from the Place Where the Machine is Hung on the Stern to the Ground Package Included1* Outboard Motor1* Tool Kit1* Fuel Oil Mixing Bottle1* Funnel1* Spare Pull Rope1* English Manual NotesPlease read the attached instruction manual completely before use. And pay particular attention to the safety instructions included. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period(10 hours).(If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.Do not touch or remove electrical parts when starting or during operation. Keep hands, hair, and clothes away from the flywheel and other rotating parts while the engine is running.Please don't start the motor on the bank. If you want to test the motor, it should be done in the river. Please don't use the motor when it stops coming out of water.When there is no water coming out of the motor, please stop using it immediately, and then check whether the pump impeller or the water outlet is blocked.We can only provide Ce certification, no other certification can be provided, thank you for your understanding.Clean the outboard engine with fresh water after sailing in seawater or turbid water. Do not leave the outboard engine out until the cooling water is completely used up. Otherwise, the water cam will enter the cylinder through the exhaust port. This will cause engine failure.Use up the gasoline in the fuel tank before storing