Uxcell V623 V-Groove Guide Pulley Rail Ball Bearings 3Mmx10Mmx3Mm Carbon Steel Miniature Bearings 10Pcs

Note:Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Carbon Steel made with heat treating, provides high and uniform hardness, good wear resistance Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selection Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: V623Type: Open TypeInner Race/Outer Race Material: Carbon SteelCage Material: Stamping SteelInner Diameter (d): 3mmOuter Diameter (D): 10mmThickness (B): 3mmGroove width: 1.63mm Groove depth: 0.5mmV groove: 90 degreeDynamic Load Rating (Cr): 536 NStatic Load Rating (Cor): 175 NAccuracy Class: P0 (ABEC1)Noise Level: Z2Number of Pack: 10Pcs